I have often been asked for a quick way to convert a Cisco IP-Phone between SIP and SCCP. People get their IP-Phones often from E-Bay or other 2nd hand resource for testing and practicing and they may receive them with the ”other” phone load they didn’t want. The easiest way to convert is via Autoregistration. With CME this is a litle more complex, but with UCM (v6 or higher) this is an easy task.
First of all, switch on Autoregistration. If you need help with that, there is another post by Brandon in this blog how to switch on Autoregistration.
Second,…

[ Read the rest of the story in the original article... ]

To begin with, if you follow Zeitgeist* you can see if there is anything that catches the eye.. These are the keywords that are ‘hot’ at the moment, if they excite, then add them to the list. If they are particularly new, the analysis that follows may be invalid, so please use common sense. i.e. ‘world trade center’ would have been ‘cold’ before 9/11, then hot, then cooling over the following years and now it will be hot again because of the film. If in doubt, check the trends to see the movement over the years.
You probably don’t want…

[ Read the rest of the story in the original article... ]