How many times has this one happened to you? Just coming home from work, you walk in from the garage, settle down, and pick up the newspaper. But wait, did you remember to shut the garage door?
Presenting the open garage door indicator. [xjc2010] chose the simplest circuit possible, using only a switch to turn on and off the setup, an LED acting as the signal, and a transformer/resistor combo to drop the voltage to an acceptable LED friendly 2.8 volts. We don’t like how he strung wire all over his house to place the beacon, and would have…
Hack
Open garage door indicator
Hack
Introduction to FTDI bitbang mode
It was an interface that launched a thousand hacks. Near trivial to program, enough I/O lines for useful work, and sufficiently fast for a multitude of applications: homebrew logic analyzers, chip programmers, LCD interfaces and LED light shows, to name a few.
Today the parallel printer port is on the brink of extinction (and good riddance, some would say). Largely rendered obsolete by USB, few (if any) new peripherals even include a parallel connector, and today’s shrinking computers — nettops, netbooks, media center PCs — wouldn’t have space for it anyway. That’s great for tidy desks, but not so…
Hack
Defocusing LED Clock
[Dennis] has created a well-documented and very beautiful clock in his latest project. This clock stands out from the other clock projects we have covered with its unique display. The seven segment LED displays mounted on a sled that moves them back and forth behind an array of fiber optic lenses, effectively taking the display out of focus at certain points. Currently, a Dorkboard controls the sled, moving it at random intervals. The case is machined and polished aluminium, the top buttons are ball bearings.
Hack
BlokClok – Abstract time display
Clocks made from blinking LEDs always make for fun projects. [Earthshine] built a clock that displays time abstractly using an 8×8 RGB LED matrix. The video embedded after the break illustrates how to read the time but here’s the gist of it: One LED is illuminated in the outside box of LEDs and moved in a clockwise motion to approximate seconds. Inside of this, there are four quadrants; upper left indicates hour-tens digit, upper right hour-ones, lower left minute-tens, and lower right minute-ones. This certainly makes for an interesting conversation piece!
There is no schematic and no code available…
Hack
Wireless RGB light bulb
Want to make the above yourself? [Sprite_tm] did a thorough job documenting the build step by step (complete with pics, schematics, graphs, and links to the parts used). In summary, [Sprite_tm] busted open an Ikea CFL bulb to reuse the housing. Inside, he installed a scavenged power supply, ATtiny44, RGB LED module, and a radio receiver. A remote control allows [Sprite_tm] to change the lighting of his room to nearly any color. The cost of the project is a little under $30. The price tag isn’t so steep when one considers the insanely long lifetime of LEDs.
Hack
Router/Twitter/Arduino clock
[Kyle] decided to build the above LED clock for his church. Though it may look impressive enough, it is also hiding loads of features. [Kyle] wanted to make the clock as easy to control as possible, so rather than use buttons or dials to control what is being displayed, he used Twitter. The clock is connected to the internet through a Linksys WRT54GL. The router was hacked so not only does it supply the connection to Twitter, it also parses all of the replies the clock’s feed gets. The clock responds to commands to turn it on or off, run a countdown before service,…
Automotive
How to Install Neon & LED Interior Car Lights
Our team of dedicated Market & Product Researchers fromAll-Neon-Car-Lights.com, and including myself, have spent anenormous amount of time & money installing interior car lights &under car kits from a variety of manufacturers onto our testvehicles, and as a result after all this testing, we can nowprovide you with "Basic Generic Instructions" on how toinstall these types of car lights on your vehicle. Theseinstructions have been designed with the "Novice" in mind. We also found after this extensive testing was carried out, thatPlasmaglow had the best, all round car lighting productsavailable on the market today, outlasting and out-performing thecompetition in…
Hack
Arduino email alert
The Arduino makes a great platform for alert systems because it doesn’t need additional parts, other than an LED or motor. [Torchris] made email notifier, and used an Ethernet shield to make it standalone. The Arduino polls your POP server seeing if there are unread emails. POP is an incredibly simple protocol, even simpler than HTTP; this made it easy to communicate with, even with little processing power. He hopes to add a servo or serial display to present the data better, but his current system seems to work well. Video of it in action after the break.
[via…
Hack
Single Tube Nixie Clock
This single tube nixie clock cought our eye today. After receiving an IN-8 tube from a friend, [Trax] wanted to find some project to show it off. He decided on an art piece that doubles as a clock. Tastefully mounted in a simple wooden box with a pretty inlay, the tube is lit from below with a green LED that pulses every second. A single button, located on the back, out of view is pressed to request the time. You can see the time being displayed on the video above. To see the guts and read about how he’s…
Hack
Neo-Geo case mod
What do you get when you cross a Neo-Geo and a Sega Genesis? A pretty vintage case mod. [Brett] used a variation of the 16-bit console (known as the Mega Drive II) as the base of his project. With an original Neo-Geo motherboard and a few other components (such as a power indicating LED), the ‘Geosis’ was born. [Brett] removed a few of the unnecessary parts from the mobo, like the power-amp, and set it up to work with a regular 5V DC wall adapter. The PCB also had to be clipped so it would fit into the Mega Drive chassis.
Though it…
Hack
Simple automatic LED lamps
[woody1189] put together some automatic lighting for his closet. Nine LEDs are grouped into three lamps and controlled by a hall effect sensor. He prototyped this on an Arduino and then migrated over to an ATtiny85. Although the current implementation could be accomplished without a microcontroller, we’d love to see some firmware improvements such as an auto shutoff for when you forget to close the closet door. The hall effect sensor seems to pop up in a lot of projects so make sure you get a few of them with your next parts order. Video of this in action…
Hack
Peggy-zilla
For some, a peggy 2.0 is pretty cool, but simply not impressive enough. [MonsieurBon] felt this way and simply built a larger LED rig for his peggy2.0. It still uses the brains of the peggy, but the LED array is a custom built cabinet, using ping pong balls as diffusers. Another interesting modification is that they added a midi port to the setup to generate music based on what LEDs are lit. They say it creates some nice background generative music during the game of life. You can see a video of the system in action after the break.…
