Futaba makes vacuum florescent character displays that can be used as a drop-in replacement for common character LCDs. VFDs have a wider viewing angle, and generally look cooler.
Futaba’s character displays can be interfaced using the standard 8-bit or 4-bit parallel LCD interface, or a simple two-wire protocol. The protocol type is set by resistors on the back of the display, so it’s not particularly easy to change without a hot-air rework station. Today we’ll demonstrate a serially-interfaced VFD using the Bus Pirate.
Futuba VFD character LCD replacement (NA204SD02, $7.00). Datasheet (PDF).

VFD (pin #)
Bus Pirate

GND (1)…

[ Read the rest of the story in the original article... ]

The PCF8563 is a real-time clock/calendar/alarm chip with an I2C interface. This would be useful in projects where the primary microcontroller doesn’t have enough resources for an interrupt driven clock.
We demonstrate the PCF8563 using the Bus Pirate after the break. For a limited time you can get your own Bus Pirate, fully assembled and shipped worldwide, for only $30.

PCF8563 real-time clock calendar (Octopart search, $1.33). Datasheet (PDF).
The schematic above shows a bare-bones circuit for the PCF8563. It requires a simple external oscillator circuit with a 32.768khz watch crystal (Q1). The oscillator input pin needs an external…

[ Read the rest of the story in the original article... ]