Hackaday alum [Will O'Brien] cleaned up his messy breadboard with an RGB keylock Arduino shield. You may remember this two-part project from last year. It uses buttons backlit by an RGB LED to operate a door lock.
[Will] is still mulling over what type of kit options he will offer. We’re happy to see if the most important part, a laser-cut key bezel, will be available. This makes for a professional looking finish that made the original project difficult to replicate.
Hack
RGB Keylock Shield
Hack
BlokClok – Abstract time display
Clocks made from blinking LEDs always make for fun projects. [Earthshine] built a clock that displays time abstractly using an 8×8 RGB LED matrix. The video embedded after the break illustrates how to read the time but here’s the gist of it: One LED is illuminated in the outside box of LEDs and moved in a clockwise motion to approximate seconds. Inside of this, there are four quadrants; upper left indicates hour-tens digit, upper right hour-ones, lower left minute-tens, and lower right minute-ones. This certainly makes for an interesting conversation piece!
There is no schematic and no code available…
Hack
Wireless RGB light bulb
Want to make the above yourself? [Sprite_tm] did a thorough job documenting the build step by step (complete with pics, schematics, graphs, and links to the parts used). In summary, [Sprite_tm] busted open an Ikea CFL bulb to reuse the housing. Inside, he installed a scavenged power supply, ATtiny44, RGB LED module, and a radio receiver. A remote control allows [Sprite_tm] to change the lighting of his room to nearly any color. The cost of the project is a little under $30. The price tag isn’t so steep when one considers the insanely long lifetime of LEDs.
Hack
Software pulse width modulation
Pulse Width Modulation is a topic that tends to give a lot of beginners trouble. [Daqq], whose nixie plasma ball we covered a few days ago, has a simple but effective PWM project that you should take a look at. The circuit used 9 LEDs clustered together into 3 sets of RGB modules and connected them to an AVR ATtiny2313 through some current limiting resistors. Most of the time the PWM function of the AVR’s timers would be used to generate the signal but this application calls for 9 signals which is more than can be produced by this…
Hack
Hard drive RGB clock
We’ve brought you an HDD clock in the past, but [mb1988] tried to bring his project to another level by fully documenting it (in Polish). Inspired by [dzgdzzh]’s version of the same invention, [mb1988] decided to reverse engineer it (as well as make a few changes) and base it on the powerful ATmega128. Since this clock, along with most HDD clocks, can only display solid lines of radii, it cannot be used to display text. However, color schemes and animations can be toggled using a remote control. The housing itself is also pretty impressive. The back part of the enclosure was molded out of Rayobond,…
Hack
DIY AVR USB RGB LED notifier
Giving us a chance to break out the TLAs, [Blair] sent in his latest hack where he embedded an RGB LED into his EeePC to display twitter, pidgin, and email notifications. It is based around the ATtiny45, and requires very few additional parts. He based the project on a foundation of work laid by [Dennis Unter] on notifications and the work of [Dave Hillier] that used V-USB, a library for implementing USB on AVRs. The entire circuit was done freehand and crammed inside the netbook. He says that it is a lot easier to see notifications, even when the…
Hack
Massive LED screen project
The folks over at basicmicro.com are working on a massive LED display. They currently have one 32×32 RGB panel working. It displays 50 fps at 140 hz but the one above is only running at about 24 fps. The final display will be 40 of these panels. This thing is going to be massive. We have to wonder how this compares, financially and performance wise, to the commercial signage that displays videos.
Hack
Parts: ShiftBrite RGB LED module (A6281)
Macetech’s ShiftBrite is a high-power RGB LED coupled with an Allegro A6281 backpack. The A6281 uses three 10bit pulse-width modulators to mix millions of colors using the red, green, and blue elements in the RGB LED. Multiple modules can be chained together for bigger projects, like the ShiftBrite table.
Below the break we demonstrate a ShiftBrite module using the Bus Pirate. For a limited time you can get your own Bus Pirate, fully assembled and shipped worldwide, for only $30.
ShiftBrite RGB LED module (Macetech, $4.99). ShiftBrite datasheet and example code, Allegro A6281 datasheet (PDF).
The ShiftBrite module is…
Hack
Econo Monome
[Mike] really liked the thought of the Monome, especially the green aspect of their construction. He felt he could take it a step further. After 40 years of electronics tinkering, he had quite a spare parts box. He constructed his monome clone from stuff he just had laying around. All of his pieces were either rejected samples from his company or outdated parts destined for the trash bin. Great job [Mike]. If you are planning to build one and don’t have the buttons laying around, you can get a more typical monome look and feel by going with the…
Hack
Things to hack: sub 100$ toy night vision, projector, and tv game
Ars Technica writes about three new toys coming out this year: a sub 100$ projector, tv game, and night vision goggles. The projector runs at standard TV resolution, takes standard composite in, and outputs an okay picture. The night vision goggles are monocular but focus both eyes on a single RGB LCD. The goggles uses an array of IR LEDs instead of amplifying ambient light to see in the dark. Lastly, they have a standalone implementation of the arcade game Big Game Hunters. The rifle uses a sensor bar to do the motion tracking and features a 32MB rom…
Hack
Addressable RGB LED strip
[Synoptic Labs] stumbled upon an RGB light strip with individually-controllable LEDs. The strip uses 5 volts and is controlled by an HL1606. Because the strips are hard to find, this chip is mostly undocumented and he had trouble driving the strip. He was unable to get it working until he met with [John Cohn], who had previously reverse-engineered the serial protocol. Working together, they released a library for the Arduino to drive the strip. So far, the library only supports fading each LED, the only known functionality. If more strips like these were available, constructing LED matrices would be…
Hack
Peggy 2 super pixels
[Windell] from Evil Mad Scientist Laboratories took one of their Peggy 2 kits and gave it a little upgrade. The Peggy 2 is a programmable 25×25 LED display. It’s Arduino compatible and can accommodate big 10mm LEDs. Most people assemble them using just one color, but [Windell] decided to create giant RGB pixels by placing discrete red, green, blue, and white LEDs next to each other in the board. This creates a 12.5×12.5 grid of full color pixels. It’s an interesting effect and you should definitely check out the video embedded below which shows how the transition can be…
