[Kyle] decided to build the above LED clock for his church. Though it may look impressive enough, it is also hiding loads of features. [Kyle] wanted to make the clock as easy to control as possible, so rather than use buttons or dials to control what is being displayed, he used Twitter. The clock is connected to the internet through a Linksys WRT54GL. The router was hacked so not only does it supply the connection to Twitter, it also parses all of the replies the clock’s feed gets. The clock responds to commands to turn it on or off, run a countdown before service,…

[ Read the rest of the story in the original article... ]

Reader [john] finished up his home power monitor over the holiday weekend. It uses a pair of current transducers clamped onto the mains. These output 0-3V and are read by the Arduino’s ADC. The Arduino averages samples over a 20 second period, calculates power used, and uploads it using an Ethernet Shield. The shield can’t do DNS lookups, so he uses a WRT54G to negotiate with the remote webserver. He admits that the system could be more accurate; it can’t detect small loads like wall warts. He also says that money could be saved by talking serial to the…

[ Read the rest of the story in the original article... ]